Pages

Showing posts with label mistakes. Show all posts
Showing posts with label mistakes. Show all posts

Wednesday, March 30, 2011

"Gone Nuts 3D" Takeaway #3: Move Over Roll Angst, Meet Zoom Disparity

3. Move Over Roll Angst -- Meet Zoom Disparity
The Day Zoom Disparity Became My Top Nemesis

During the introductory film production labs I teach, I have seen the gamut of problems beginning videographers face: forgetting to white balance, neglecting to use neutral density filters, using the wrong neutral density filter, and my favorite, the infamous camera-bag-and-tripod-in-the-shot.  (Granted, you did a great job not leaving your gear unattended!)
Keetin in Booth 3: Home of the S3D editor



Stereoscopic 3D introduces a whole new field for mistakes and disparities that arise between the left and right clips.  In editing the clips together, I performed vertical image translation (VIT) to change the vertical positioning of one clip in order to align the clips.  After VIT, the two images still did not match.  So, I changed the rotation of one the clips.  Still, something was off.  After minutely adjusting the VIT and rotation, I was no closer to adjusting the problem.  Then I recalled what the stereoscopic editor from the first project had mentioned during their project post-mortem: for some shots, he discovered the cameras were zoomed to different distances.  I opened up the Sony XDCam Browser to examine the metadata for the clips and see if this, too, was my problem.  Sure enough, for a handful of clips, the camera zooms were set differently. 



To fix the problem, I scaled one of the images up and proceeded to adjust the VIT and correct the roll.  Voilà!  The disparities were fixed and the clips were for the most part aligned.  

S3D requires an even more watchful eye on the part of the stereographer who now has double the cameras to monitor and watch for small problems and mistakes.  Thankfully, zoom disparity is a detectable problem and easy to fix during production and is fixable during post-production.
 Now whenever I am editing and cannot align the two clips, I instantly suspect a zoom disparity and check the metadata.  The sneaky thing about detecting a small zoom disparity is that the size difference is very, very subtle (especially in grass). So, when in doubt, check for zoom disparity. 


LESSONS LEARNED
1.  When importing your clips, never delete the metadata information.  This may prove to be very useful to you later, especially if your footage log did not include this specific information.
2.  When the two clips do not align, double check to see if there is a problem aside from roll or vertical disparity.
3.  Faithfully stick to the left camera to not only watch for the matte box but more importantly, to check that both cameras are on the same zoom.
4.  Always check with those who have performed your job before.  They hold a rich trove of experiential knowledge.
5.  A 1 mm zoom difference does not correlate to a 1% scale difference.  So, experiment to see which up-scaling percentage minimizes disparities.
6.  Editing angst is bonding.  The editors from the first round of projects enjoyed commiserating and after each project, another editor developed a distaste for zoom disparity.  The first round editors also watched the left camera like a hawk during the second round of projects because we understood the headache slight differences between the two cameras made.
7.  All stereographers should edit S3D sequences. Through the process of editing and aligning the left and right clips, I saw and grasped the different technical challenges in stereoscopic 3D production that I was aware of before because of our reading but did not understand.  I approached our subsequent projects with a changed eye, knowing what had caused me consternation in the editing booth and looked out to catch these problems during production.

Wednesday, March 23, 2011

Sophie's Top 5 Takeaways from "Gone Nuts 3D"

Kate Braun and Frank Buczolich in Gone Nuts 3D (2010)

As university students, this is a prime time in our lives to try something, learn from it, try again, and repeat.  Each project we work on deepens our understanding of what we read in our textbook and weekly readings and what our instructors taught us during class.  As live-action stereoscopic 3D students, each project is an opportunity to learn more about the do's and don'ts of stereoscopic film-making and to adventure with other stereoscopic filmmakers doing the same.

Last semester, after each 3D group finished their project’s film shoots, we held a post-mortem the following class session.  During this post-mortem, the group members shared about what went well during production and shared tips for the rest of the class members to learn from.  This way, we could learn from each other’s successes and mistakes and make new mistakes instead of repeating the same ones. 

So, this week, I will be sharing my Top 5 Takeaways from “Gone Nuts 3D” where I served as the stereoscopic editor.  These takeaways cover what I learned from working as stereoscopic editor for this project and how it has guided my future stereoscopic 3D projects.

Sneak peek - Tomorrow's Takeaway #5 has to do with The Day Marking My Compulsion to Obsessively Check the Split Beam and Left Camera.